--Hosting Problems-- Already Read the Sticky topic
 

Alright, I get it. I know how to do it sort of. But I don't know which port is which. I have to leave two slots open, one for TCP, and one for UDP. But the bottomline is, I need to know what to put in for these blanks. I already filled out some...

Enable: Click the checkmark for this
Description: Write in JJ2 or something
Inbound Port: _____ - _____
Type: One for TCP, the other for UDP
Private IP Address: Already know
Private Port: ____ - _____

Basically the information is bold is the stuff I don't know. And basically the two blanks are pretty much the range of the port, from what to what...

I have a Belkin 802.11g router, I use Windows XP. And I think the firewall is coming from the router, since basically the Win XP one is off.

Thanks for helping,
~Tublear

Inbound port: 10052-10054
Private port: 10052-10054

I think you only need 10052, but it can't hurt to map the others.

Thanks :), Now I gotta test this out and see if it works...

EDIT: Err, it didn't work, I don't know what I'm doing wrong, maybe you can tell:

[img]http://mysite.verizon.net/vze89vs6/sitebuildercontent/sitebuilderpictures/firewall.jpg[/img]

Apparently, none of these things that I uploaded work. And that's supposed to be my IP Address.

Yeah, I still need help!

Maybe you somehow used the wrong IP. And have you tried DMZ yet?

Yeah, I can't stand that program, It's not helpful at all.

It could be the IP, althought I checked it, It seems to be correct. Plus, the first entry was already filled in, with everything.

Very, very odd. I have the same Belkin router and JJ2 automatically works here (without having set ANY ports at all).